Description

The Perkeo LPG soldering iron is a technically sophisticated quality product that is made only from the finest materials such as stainless steel, solid brass and teflon.
Exceptionally heavy duty, low maintenance and easy to operate, it is ideal for everyday use. And it goes on working well despite moisture, solder chemicals or the toughest jobs. The PERKEO heavy-duty propane soldering iron is a quality German product you can really depend on. A PERKEO heavy-duty propane soldering iron burns straightaway. In less than 55 seconds the 350g soldering bit heats to the operating temperature. There’s no easier or more timesaving method of soldering available. You can work with the PERKEO’s powerful and constant flame even in strong winds and without using a windbreak.

• Gas consumption at 1.5 bar: 130g/h
• Output 6026KJ/h 1.67KW
The soldering iron described here works with mid-pressure propane at an ideal operating pressure of 1.5 bar. Performance is enhanced by increasing the pressure up to a maximum of 4 bar.

Faster warm-up!
The core drill holes and the chamfered edges on the underside of the copper bit increase the surface area to be warmed up. This facilitates a better distribution to the heart of the torch flame and enables a faster warm-up.

Rigid positioning of the soldering iron
The flattened rear face of the steel shaft prevents the soldering iron from turning away.
High thermal conductivity and retention due to cold-rolled electrolytic copper as base material.
Due to the ideal thermal transfer of the electrolytic copper, the soldering iron heats up to operational temperature in less than 45 seconds – in addition the base material guarantees maximum
thermal retention and thereby achieves a lower gas consumption when soldering.

  • Fast ignition without using an air slider.
  • Reliable action, perfect handling.
  • Handy control wheel to provide the exact amount of gas. The flame responds instantly.
  • Ergonomically designed handle made of hard wood (common beech), very well insulated.
  • Rotatable tube connection, for either M10x1 LH or G 3/8” LH.
  • Valve gasket made of indestructible teflon.
  • Back cap and valve rod made of stainless steel.
  • All individual parts available as spares.
  • Easily adaptable with its versatile accessories.
  • Especially durable 350g soldering bit made of electrolytic copper, also available in point or hammer form.

Products available

  • 784-3/T – Soldering iron handle
  • 209/2 – 350 gram pointed solder bit
  • 208/5 – 350 gram hammer solder bit